当前位置：
上海同卡实业有限公司 >
产品中心 >
德国普罗名特 > 余氯电极CLE3.1-CAN-10PPm
余氯电极CLE3.1-CAN-10PPm
| 产品型号： |
CLE3.1-CAN-10PPM |
| 品 牌： |
普罗名特 |
|
|
| 所 在 地： |
上海 |
| 更新日期： |
2024-04-20 |
余氯电极CLE 3.1-CAN-10PPm
Sensor for connection to a CANopen interface (e.g. swimming pool controller DULCOMARIN® II)
Measured variable free chlorine (hypochlorous acid HOCI) with large proportions of bound
chlorine; to detect bound chlorine using DULCOMARIN® II and Sensor
for Total Chlorine type CTE 1-CAN
Reference method DPD1
pH range 5.5 … 8.0
Temperature 5 … 45 °C
Max. pressure 1.0 bar
Intake flow 30…60 l/h (in DGMa or DLG III)
Power supply Via CAN interface (11 – 30 V)
Output signal uncalibrated, temperature compensated, electrically isolated
Typical applications swimming pool, drinking water with a higher percentage of bound chlorine
(surfactant-free)
Measurement and control DULCOMARIN® II
equipment
In-line probe fitting DGM, DLG III
Compatibility CANopen bus systems
Measuring principle amperometric, 2 electrodes, diaphragm-covered
Measuring range Order no.
Chlorine sensors with 100 ml electrolyte
You require assembly kit (order no. 815079) for the initial installation of the chlorine sensors into the
DLG III in-line probe housing.
